1.     AUTO PATH FINDER ROBOT

In this project we show that how we design the robot for auto path finder . In this project we use two infra red sensor on the front of the vehicle. Two gear dc motor for smooth vehicle driving. In normal condition when this  robot move on the   track  forward. Now if any sensor sense a  reflection then robot change its direction by changing the direction of its one motor for a small time and again move forward Both the sensor control the two different motor at a time.

2.ANTI FALLING ROBOT.

This is a new concept of future vehicle. Imagine that if any robot move on the surface if suddenly there is a big hole in the surface. Then how we stop the vehicle  for falling in the hole .We design a special depth sensor for this purpose. Depth sensor automatically sense the  depth and change the direction of vehicle and stop the vehicle for falling in the hole.

  3.LINE FOLLOWER ROBOT.

Line follower robot follow the black line on the white surface with the help of two different sensor. Both the sensor sense the black line and  if the sensor is on the white surface then robot slightly changes its position and  again follow the black line.

• LAKSHMAN REKHA ROBOT:

For demonstrating this robot we mark the white board with black line , our robot cannot cross this outer surface .Whenever robot sense this rekha then robot revee back for few step and  again go forward to locate a  breakage in the  rekha , if there is now breakage then robot move only across the rekha.

• AUTO CLEANER ROBOT.

Assume that robot move on the way , suddenly any object is in the front of the robot . Now robot stop automatically and  one cleaning arm remove the object from the front and robot again sense the interruption, if there is no interruption then robot move forward again, in this project we use three dc motor’s . Two motor for the vehicle movement and one motor  for the cleaning the object.

• THREE MOTOR SIX MOVEMENT ROBOTIC ARM.

One for the base movement

One for up and down arm movement

One for grip and un-grip the  object.

Control option

Wired 6 different switches

• PC CONTROL ROBOTIC ARM

Control  all the six movement of robotic arm with the help of computer . Now  we control the robotic arm with  the help of C++ software. Parallel port connectivity with hardware and  three different motor’s.

    7.WIRELESS ROBOTIC ARM.

Control all the movement of the robotic arm with the help of  multi channel remote control. One preprogrammed micro controller in the transmitter and one preprogrammed micro controller at the receiver to control all the movement of robotic arm.

8. SM CONTROL ROBOT

Control the movement of the  any car  with the dtmf technology and control the movement of  CAR. Move forward, revee, left and right  with  GSM TECHNOLOGY.

9. MANNED VEHICLE .  

Once battery is on move on the track like metro, stop on different points, auto revee on end of path and move on the path   automatically forward and revee. Using only one motor for forward and revee movement.

AUTO STOP TRAIN

If the two train on one track then  trains stop automatically with infra red sensor’s and receiver circuit.

 10. RAILWAY CROSSING SYSTEM.

           Auto railway crossing system , automatic open and close the railway phatak with the help of different sensor’s,  alarm system is also on railway phatak. Using DC motor control system.

1. WAY MONITOR SYSTEM.

By using this system  we monitor the position of  train on the track by using different sensor’s, using microcontroller and different sensor’s. we will use 16*2 LCD.fish plate indication+ railway crossing

1. AUTOMATIC  METRO TRAIN.

(  with track)

1. Train is automatic on and automatic  stop on each and every station automatically. Train takes a revee action automatically and move on the track  
2. METRO TRAIN WITH LCD.

( with track)

IN this project train will move forward and back with IR senso. Stop on every station and will indicate on LCD.

1. PC CONTROL METRO TRAIN.

In this model we show that how we control the movement of train with the help of computer. C++ interface, Parallel port interface

1. UP-DOWN LIFT.

 with LCD

In this project we show that how we control the movement of any platform with the help of  different sensor’ using slow speed DC motor.

1. MULTILEVEL PARKING LIFT.

In this project we sense the position of the lift with the help of the different sensor and at the same time we check the position of the parking position on the floor, If the floor is full then lift go the the next floor, If the next floor is also full then llift came back to the origional position.two sensor on each floor and two floo.

1. AUTO PARKING SYSTEM.

When  one car is enter in the parking system then increment counter increment the counting, car park in the system and car place is indicate in the display. Now when car leave the parking then down  counter decrement the counter system. When parking is full then  parking door is  automatic shut down

1. AUTO PARKING SYSTEM+ paid toll tax plaza.

When  one car is enter in the parking system then increment counter increment the counting, car park in the system and car place is indicate in the display. Now when car leave the parking then down  counter decrement the counter system. When parking is full then  parking door is  automatic shut down, . in this project we will use switches or ir sensor as a coin detector  to pay the fees at toll plaza. Amount will be on 16*2 LCD. Only one barrier for toll plaza,

• AUTO PARKING SYSTEM+ paid toll tax plaza+ smart card.

When  one car is enter in the parking system then increment counter increment the counting, car park in the system and car place is indicate in the display. Now when car leave the parking then down  counter decrement the counter system. When parking is full then  parking door is  automatic shut down . in this project we will use smart card to pay the fees at toll plaza. Amount will be on 16*2 LCD. Only one barrier for toll plaza,

• AUTO PARKING SYSTEM+ RF Remote control

When  one car is enter in the parking system then increment counter increment the counting, car park in the system and car place is indicate in the display. Now when car leave the parking then down  counter decrement the counter system. When parking is full then  parking door is  automatic shut down . in this project we will control devices using RF Remote.

• P.C CONTROL ELECTRICAL APPLIANCES.

In  this project we show that how we control electrical appliances with the help of computer. Parallel port connectivity.  Unique feature of embedded system control  hardware. When we put a password in hardware then software passes the  control logic in hardware.

• P.C CONTROL ROBOTIC ARM

Using three different motor we can control the movement of  robotic arm with the help of C++ software.

• P.C CONTROL SMART CAR + Device Control

In this project we show that  how we control the movement of any car with the help of computer. Car will be readymade RF car.

• P.C CONTROL ACCESS CONTROL DOOR OPENER.

.

Enter a proper password in the computer , If the password is ok ,Output unit is on. If Password  is not ok circuit block after some time.for chaning a password enter a master password to change the password/

• P.C CONTROL WIRELESS HOME AUTOMATION

Control upto  4 unit with the help of pc output with RF technology.

• PC CONTROL WIRELESS CAR.

Control the movement of any car with the help of computer, wireless control, move forward, revee, right and left control

• PC CONTROL UN-MANNED METRO TRAIN

IN this project we use  the concept of unmanned metro train, train start automatically, stop automatically and stop on different station step by step

• PC CONTROL HOTEL POWER MANAGMENT

Control the light for on and off  from the reception side  is very  important for the  hotel power management

• PC CONTROL LIFT

Control the movement of mechanicallift with the help of c++ software. Parallel port interface, mechanical lift using DC geared motor

• PC CONTROL STEPPER MOTOR.

Control the movement of any stepper motor with the help of the c++ software. Control direction, speed 

• PC CONTROL 4 stepper motor card ( preprogrammed robotic)

Wonderful control of 4 different stepper , as per the freedom of choice, control sequence control, control direction, control speed of all the motor by program logic.

• Wireless data transmission through Radio frequency.

IN this project we show that how we transfer the data from one  controller to second controller with the help of radio frequency. Data is serially transfer through  infra red or radio frequency..

• MOBILE IRRIGATION –

In this project we show that how we control the  working of the  pump in the filed from any part of the world using mobile phone. With the help of mobile keypad and satallite as a communicator it is possible to control up to 10 control at a time.

• MOBILE DEVICE CONTROL–

In this project we show that how we control the  working of HOME appliances from any part of the world using mobile phone. With the help of mobile keypad and satallite as a communicator it is possible to control up to 10 control at a time

• I.R CONTROL ROBOT.

In this project we show that how we control the movement of the small robot through a I. R based remote. With the help of this remote it is possible for us to control the movement of the robot from the range of 15 feet. In the transmitter and receiver  both the circuit we use ic 89S51 as a main microcontroller to control all the function of the project.

• PROGRAMMABLE    ELECTRICAL DISTRIBUATION

In this project  we show that how we control the electrical distribution  in different timing control. All the timing is control by the embedded digital clock. We control on time and off time for all the four different output  with the help of menu driven soft ware.

• RAIN PROTECTOR LOGIC.

In this project we  the new concept in  home automation, By using this project we  save the cloth from the rain.

When Rain came then sensor sense the signal and at this time motor start to rotate and due to this motor moves and cloth cam back in the shelter. In the shelter one sensor is there and rope  mounted on the pully is  atop automatically in the shelter and due to that we save the cloth from the  unwanted rain.

• RAIN PROTECTOR LOGIC+LCD
• In this project we  the new concept in  home automation, By using this project we  save the cloth from the rain.
• When Rain came then sensor sense the signal and at this time motor start to rotate and due to this motor moves and cloth cam back in the shelter. In the shelter one sensor is there and rope  mounted on the pully is  atop automatically in the shelter and due to that we save the cloth from the  unwanted rain.
• RAIN PROTECTOR LOGIC+GSM

• In this project we  the new concept in  home automation, By using this project we  save the cloth from the rain.
• When Rain came then sensor sense the signal and at this time motor start to rotate and due to this motor moves and cloth cam back in the shelter. In the shelter one sensor is there and rope  mounted on the pully is  atop automatically in the shelter and due to that we save the cloth from the  unwanted rain.
• RAIN PROTECTOR LOGIC+LCD+GSM+LDR
• In this project we  the new concept in  home automation, By using this project we  save the cloth from the rain.
• When Rain came then sensor sense the signal and at this time motor start to rotate and due to this motor moves and cloth cam back in the shelter. In the shelter one sensor is there and rope  mounted on the pully is  atop automatically in the shelter and due to that we save the cloth from the  unwanted rain.
• BLACK BOX-
• In this project we will use different senso in car for security purpose. We will use LDR for detection of car coming from opposite side in night mode and will automatically start dipper. IR senso to detect outsider when we are not in car then it will give signal to buzzer.
• BLIND STICK.with smart logic.

• IN this project we show that  if  the stick is misplace in any way then how we locate it. We insert a small infra red sensor in the stick. We locate this stick with the help of any remote. If the stick is in the range of any remote then blind peon locate this stick with the help of any tv remote. 36 k hz signal is to be transmit from the remote and if the stick is in the range of stick then  stick sense the signal and alarm is on in the stick

• MULTI-LEVEL PARKING LIFT.
• In this project we show the concept of multilevel auto parking system. In this lift we show the two level  parking on fit floor and on second floor. Lift automatic sense the space and if the space is available on the  floor then lift stop and  if there is no space on the floor then lift move up-wards and search for the second floor. If there is no space on the second floor then lift came back to the bottom space.  
• PC CONTROL LIFT:

• PC CONTROL LIFT IS WONDERFUL MODEL OF SOFTWARE AND HARDWARE, BY USING  C++ SOFTWARE AND PARALLEL PORT OUTPUT IT IS POSSIBLE TO CONTROL THE LIFT FROM GROUND FLOOR TO MANY FLOOR. ALL THE FUNCTION OF THE LIFT IS CONTROL BY THE  KEYBOARD NUMERIC BUTTON.  HARDWARE OF THE LIFT IS  BASED ON THE PARALLEL PORT CONNECTIVITY AND  STEPPER MOTOR CONTROL CIRCUIT.

• ENERGY THROUGH BUSY ROAD
• 3 MOTOR CONTROL ROBOTIC ARM
• 3+1 MOTOR BASED ROBOTIC ARM.
• AUTO.OBJECT REJECTION AND AUTO PICKING SYSTEM.
• AUTO DRIL MECHANISM FOR WORK PIECE.
• MULTILEVEL PARKING LILFT.
• AUTO PATH FINDER ROBOT WITH TWO SENSOR.
• AUTO PATH FINDER + ANTI FALLING MECHANISM
• AUTO BRAKING SYSTEM
• AUTO BRAKING SYSTEM WITH AUTO PATH CHANGER
• GSM CONTROL ROBOTIC ARM
• PC CONTROL  WIRELESS CAR
• PC CONTROL WIRELESS METRO
• PC CONTROL UN-MANNED VEHICLE PROGRAMMED
• SPEED CONTROL OF DC MOTOR
• INFRA RED CONTROL MOVING PLATFORM.
• AUTO RAILWAY CROSSING MECHANISM
• AUTO BRAKING  OF TWO TRAIN
• GPS SYSTEM IN TRAIN.
• MECHANICAL TOLLE BRIDGE SYSTEM.
• AUTO STOP, AUTO MOVE MATERIAL HANDLING TROLLY SYSTEM IN INDUSTRY
• MECHANICAL WIND MILL SYSTEM.
  • MULTI-FLOOR LIFT SYSTEM.
  • 29.    AUTO START, AUTO THROUGH MATERIAL HANDLING            LIFT   SYSTEM

• ELECTRICAL BASED PROJECT.

• MULTI CHANNEL  ELECTRICAL POINT CONTROL THROUGH INFRA RED CONTROL ( 20 FEET RANGE)

• SPEED CONTROL OF  TWO DIFFERENT LOAD THROUGH INFRA RED CONTROL( 20 FEET RANGE)

• SPEED CONTROL OF TWO  LOAD + CONTROL OF 4 DIFFERETN OBJECT THORUGH  I.R REMOTE ( 20 FEET RANGE)

• MOBILE IRRIGATION. ( Control of any electrical tubewell pump with the help of mobile phone with unlimited range)

• POWER SAVING CONCEPT THROUGH PC. ( Control 4 different point through PC and provide a control timing option)

• SCHOLL BELL MANAGEMENT SYSTEM( control of 8 different bell   on different timing with digital clock option)

• COUNT DOWN TIMER ( Set the numeric value on display and start the switch, when 0 circuit is on/off automatically)

• ACCESS CONTROL DOOR OPENER( Just enter the password, wrong password protection, change password option, memory interface, lcd display, mechanical door)

• ELECTRICAL DISTRIBUTION CONTROL SYSTEM. ( control 4 different zone , for  time control electrical distribuation system).

• MULTI- FLOOR LIFT CONTROL  FOR 4 DIFFERENT FLOOR ( STEPPER MOTOR)

• HOTEL POWER MANAGEMENT  Control the power of different room with the help of the PC.

• TEMPERATURE CONTROL FOR SPA. Control the temperature level  of spa room with  hand-on presetable control, maintain the temperature by cut off / on the unit.

• TEMPERATURE SENSTIVE FAN. Speed  is automatically control using ADC, lm335 and microcontroller system.

• CURRENT CONTROL SYSTEM ( Just check the current level by current  sensing coil, control the current flow, display on lcd.

• SOUND POLLUTION CONTROL. ( control the sound pollution of sensing the sound output and control the unit on/off as per the sound level)

• AUTO-  BRAKING, AUTO –CLEANER, ANTI-FALLING ROBOT

• In this project we show that how we design a new concept of robotics. In this robot fit of all we use infra red sensor in the front of the robot. When any object  is  in the front of the robot then robot stops automatically, then its clean  the object with third motor and  goes forward. Two motor for the robot movement and third motor for cleaning the  object automatically.

• IN the circuit we use 89c2051 microcontroller to control all the logic of the robot.  We use infra red sensor for the obstruction and infra red sensor for the antifalling logic.

• AUTOMATIC PARKING CONTROL LOGIC.

• In this project we use one microcontroller and two gates, one  gate at the  entry and second at the exit. When any car enter in the PARING then circuit display 1 and at the same one  parking slot is fill, IN this project we show that when  parking is full or display  9 number then parking door is  closed automatically. Parking is open automatically when any car leave the parking station. Main processor of this project is 89c51 controller.  For door open circuit we use one CD player loader as a mechanical door.

• OUNT DOWN TIMER LOGIC.

1. This type of concept is very well useful in industry  for automatic start and auto launch the any logic. In this project we use one seven segment display system  for up-to 9999  value. With the four different switches we select the maximum counter value. As  we press the start switch then counter start and count down to 1 increment every time. When counter shows 0000 display then circuit is auto on automatically. In this project we use 89c2051 controller. 4 seven segment display, ic 7447 display driver ic.

1. ELECTRONICS VOTING MACHINE.

1. In this project we show the working project of electronics voting machine. IN this machine we display  the  total 4 different candidate with check the volt individually. We provide a special switch  to check the total number of vote.

1. Along with this project we use one extra memory to store the data  when  battery is disconnected.
2. We make a restriction  in vote casting. It is not possible for any one  to cast the vote twice in  the machine, total control is in the hand of election controller.

1. MOBILE CONTROL ELECTRICAL APPLAINCES
2. WITH PASSWORD SECURITY
3. WIRH ACKNOWLEDGEMENT OPTION

1. In this project it is possible for any one to control any electrical appliances from any part of the  world. By using this project it is also possible  to control upto 10 different electrical  appliance. IN this project we provide a security option with the help of the password control. Fit of all we enter a password, if the password is okay then circuit  gives a audio indicatrion by 5 beeps. When we switch on any  electrical project by DTMF tones then circuit again provide a audio feed back  for on and off position

1. CONTROL COMMUNICATION USING OPTICAL FIBRE WITH MOBILE PHONE

1. IN this  project we show that  how we show the concept of  multi-mode communication. Data is to be transfer from Tx to Rx via optical fibre connectivity. By using this optical fibre we transfer the audio and  DTMF code from one side to another side. With the help of DTMF code we select the receiver unit  and then transfer the audio signal  to  different receiver

1. We show the concept of control communication with the help of DTMF Signaling either from the  keyboard  or from the mobile handset.

1. REMOTE SENSTIVE ROVER.

1. In this project we show that how we control the mechanical river with the help of infra red rover. From the range of 20 feet it is possible for us to control the movement of the rover for all the four side. In the transmitter and receiver  we use 89c51 microcontroller.  With the help  of infra red transmitter  infra  red l.e.d and at the receiver end we use TSOP 1738 for receiving purpose. When we receive the signal from infra red remote then remote receiver is activate  and control the movement of the rover  as per the remote.

1. TEMPERATURE CONTROLEER .

1. Temperature controller  is very useful in the  medical and industrial automation.  We use this concept in  new born baby incubimeter. By using this controller we set the  maximum limit of the temperature.
2. LCD display the exact value of temperature and when  lcd display the maximum value of temperature then  output unit is off automatically  until temperature cam down and maintain the  minimum temperature of the incubimeter

1. TEMPERATURE SENSTIVE FAN.

1. TEMPERATURE SENSTIVE FAN  is same as temperature controller. Along with temperature controller we set four different zones for four different  temperature. As the temperature rises the lcd display the temperature zone and this time out put resistance is connected in series with the load automatically . With the help of different value resistance
2. We control the speed of the fan automatically  .
3. Temperature is sense by the  lm335 temperature sensor. Output of the sensor is further amplified by the  op-amp amplifier. Output of the amplifier is now converted into digital signal with the help of analogue to digital converter. Output of ADC is now  processed by the controller and then display on the LCD itself. Output of the controller is  now available for the control purpose. Here in this project we use 89c51 controller  

1. MULIT –POINT ELECTRICAL CONTROL BY SMART REMOTE

1. IN this project we show that how we control the multi switches with the help of the Infra red control remote. For this project we transfer the remote data on 36 k Htz with 8 bit data . For this purpose we use one encoder microcontroller in transmitter section and decoder microcontroller in the receiver side. From the transmitter end we transfer the data serially through infra red rays. When this Rays are received by the decoder device then we control may device at a time with the help of the relay circuit.

1. DIGITAL DATA  TRANSFER BETWEEN TWO MICROCONTROLLER.

1. In this project we show that how we transfer the data digitally from one side to another side    using optical fibre or infra red rays. Data  type is ASCII code  , enter through a keyboard  display on the lcd .

1. OPTION AVAILABLE:

1. DATA TRANSFER THROUGH ADDRESS CODE.
2. ( By this technique it is possible to transfer the data in different receiver, just like a CDMA).

1. DATA TRANSFER IN DUPLEX METHOD.
2. ( in this logic it is possible to use one circuit as a transmitter and receiver also,  transfer the data in  half duplex mode)

1. SECURITY BY PASSWORD OPTION.
2. ( IN the receiver end when we receive the data , then it is possible for use to save the data with password option).

1. ENCRYPTION OF DATA  AND RECEIVE BY PASSWORD ONLY

1. MOVING DISPLAY ON LCD .

In this project we show that how we enter the data in processor and display on the LCD, After enter the data in the LCD it is possible for us rotate the data from left to right . Data is to be enter in the microcontroller by simple keyboard, This keyboard is specially design like a mobile keyboard. With the help of one switch we generate 3 different codes.

1. AUTO DIALER LOGIC.

Auto dialer logic . Its means that telephone line is automatic on if any accident or any unwanted action occu, like robbery in bank, any life saving option with  human being, gas leakage, any burgular activity in home. All this action with different sensor’s  is to be connected with this project for auto dialing concept. BY means this by using this concept it is possible  , in case of any emergency telephone line is automatic on  dial the predecided number with voice feedback mechanism

1. TELEGAURD

This project  monito the following paramete :

1)Intruder. 2)Smoke.  3 ) Water over flow 4) Gas Leak. 

In case any breach of security, the device takes the following action.1) Sound and alarm. 2)If the alarm is not switched off within 30 seconds, that means nobody is available, the device must take some more action. After 30 second, the device will dial-up the pre programmed telephone number, and will deliver the emergency message stored into speech IC. You can  change the telephone number youelf any time. Even you can feed your mobile number.

1. This is unique project designed to save electrical bills specially in hotel environment. Normally it happens that custome comes to the hotel and while going out from the hotel they often leave the lights and fan ON. Normally the custome surrender the key to the reception counter while leaving. If the reception staff could switch OFF. The power to the unoccupied rooms through there computer keyboard immediately, they can save lot of power. Similarly while handing over the key to the custome they can again switch on the power to the rented room. The project is design for four floo and eight rooms. Two rooms on each floor. Project consist software in C language
2. This is an industrial project based on µp/µc, can be utilized where temperature control is require the present project is designed for two channels can be extended up to eight channels. The  LCD displays the temperature and setting can be done through keyboard. The relay operate whenever temperature exceed the set temperature.

ELECTRICAL BASED PROJECT:

1. MOBILE CONTROL ELECTRICAL APPLIANCES.

2.MOBILE CONTROL IRRIGATION CONTROL WITH FEEDBACK SYSTEM.

3.FREQUENCY METER.

4. PRE-PAID ENERGY METER WITH GSM INTERFACE.

5. MULTICHANNEL  REMOTE CONTROL SYSTEM.

6. REMOTE LIGHT DIMMER

7. SPEED CONTROL OF 2 AC MOTOR  AND 4 ON/OFFWITH ONE REMOTE

8. ELECTRICAL BILLING CALCULATOR.

9.AUTOMATIC LOAD SHEDDING  FORLOAD DISPATCH SYSTEM.

10.TEMEPERATURE METER CUM ON/OFF CONTROLLER.

11. P.I.D. CONTROLLER

12.EARTH LEAKAGE CIRCUIT BREAKER.

13.AUTOMATIC ROOM LIGHT CONTROLLER FOR POWER SAVING.

14. AUTOMATIC ROOM LIGHT CONTROLLER WITH  LOAD VARIATION.

15.AUTOMATIC TIME MANAGER UP-TO 8 CHANNEL.

16. WATER LEVEL CONTROLLER USING MICROCONTROLLER.

17. MULTI-POINT QUIZ MONITOR SYSTEM.

18.MULTI-LEVEL AUTOMATIC ELEVATOR CONTROLLER.

19.MULTI-FUNCTIONAL DIGITAL WATCH WITH SCHOOL BELL SYSTEM.

20. PRE-SETABLE COUNT DOWN TIMER.

21.TEMPERATURE BASED AUTOMATIC SPEED CONTROLLER.

22.STEPPER MOTOR CONTROLLER.

23. PC BASED STEPPER MOTOR CONTROLLER.

24. SPEED CONTROL OF DC MOTOR FROM PC USING PWM TECHNIQUE.

25.ELECTRICAL DISTRIBUATION CONTROL WITH CONTROL TIMING.

26. ELECTRICAL WINDING MACHINE CONTROL USING PC.

27. 4 STEPPER MOTOR CONTROL WITH MICROCONTROLLER.

28. 4 STEPPER MOTOR CONTROL WITH PC WITH LOT OF FEATURE.

29. REMOTE CONTROL STEPPER MOTOR SYSTEM.

1. GSM ROBOT.

In this project we show that how we control the small robot with the help of GSM mobile phone, In this project we show that how we control the movement of the robot from any part of the world. By  using any phone it is possible to control the robot from unlimted range.In this project we use two slow speed motor with  89c2051 ( 20  pin ) microcontroller.

1. AUTOMATIC  ROOM LIGHT INTENSISTY CONTROL.

In this project we show that how we control the intensisty of the room light with the help of this project. When any peon enter in the room then infra red sensor activate automatically and switch on the room light. As second peon enter in the room then at the same time intensisty of light increase automatically. Intensisty of the light is vary as per the peon enter in the room automatically. 89s51 based microcontroller

1. SIMPLE OPTICAL FIBRE  COMMUNICATION.

. 1200 In this project we show that how we transfer the data from one side to another side using optical fibre or laser. In this project we not only transfer the sound signal from one side to another  side but transfer the digital signal also

1. . SIMPLE OPTICAL FIBRE  voice and data COMMUNICATION.

 In this project we show that how we transfer the data from one side to another side using optical fibre or laser. In this project we not only transfer the sound signal from one side to another  side but transfer the digital signal also.

1. Access control-

In  this project we will control the door using password. There will be  two passwords. One user and one maseter. Master is fixid in programming. Master cab change user password anytime by entering master password. Will use 89s51 and LCD 16*2. keypad. Maximum password capacity. EEprom for permanent storage 24c02.

1. ACCES CONTROL WITH  5 DIFFERENT I.D + 5 DIFFERENT PASSWORD  CONTROL. , 8000

( In this project we show the advance level of access control system, This access control is still for 5 peon but in future it is possible to  design this for many- many peon , without pc interface.  Fit you enter your  ID , if the ID is correct then you enter a password and if the password is ok the door is open. If the password is not ok then alarm is on.  I f you want to change the password then fit of all you  enter your id and then change your password. Now MASTER  is here with master key. Master change the password of any one after entering a id . All the detail of password ,  change password is store in the external memory 24co2. Microcontroller 89s51. lcd display

1. 2.MOVING DISPLAY ON BIG L.E.D DISPLAY WITH  KEYBOARD + DATA SAVED IN 24C02 MEMORY.

L.E.D MOVING DISPLAY  WITH 32 LINE OF 8 SERIES LED    with microocntroller interface 89s51  . Data is input by the external keyboard ASCII . data is to be stored in 24c04 memory. Upto 500 character is to be stored in the memory.

1. 3.AUTOMATIC GEAR CONTROL WITH RPM COUNTER.

In this project we measure the speed of motor and when motor speed is change  then we measure the speed of motor in RPM and display on the lcd. According to the speed of the  motor we change the gear from 1 to 4 automatically. Lcd display microcontroller 89s51 interface.

1. 4.DIGITAL FUEL METER.

 In   project we use the floating system of the care petrol  tank and  with the help of digital converter and microcontroller we display the  level of liquid  on the lcd. In the lcd we not only display the  fuel level but at the same time we show the average coverage area in milage  on the lcd. We also set the reserve setting of the petrol from the external switches.

5.SPEED CHECKER FOR HIGH WAYS.

In this project we not only display the  speed of moving vehicle   but display the speed on the lcd. If the speed is above the limit  then protection door is shut down  , if the speed is slow then door is open. Speed is detect by the two infra red sensor. Microcontroller 89s51, lcd display, slow speed motor of  door.

1. REAL HEART BEAT MONITOR WITH LCD DISPLAY.-

In this project we show the unique concept of heart beat measurement by  body resistance. As the   heart pump there is small change of body resistance in the palm ,  we use this concept in the automatic  exercise machine  in zim.  We  use this technique and display on the heart beat pumping on the lcd .

1. ULTRA SONIC DISTANCE METER.

So advance project , by sending a echo from the transmitter and receive the same on the  other receiver and display the distance on the lcd. Using ultrasonic transmitter and receiver . Microcontroller 89s51, lcd display 

1. 8.TRAFFIC LIGHT+ FOUR SIDE L.E.D + ONE SIDE COUNT DOWN TIMER+  DENSITY CONTROL + SPECIAL PROVISION FOR  AMBULANCE + ROAD SIDE PEDESTRIAN CONTROL  THROUGH MOTOR.

Using 89s51 controller and all the function related to the traffic light. Count down timer  and  if the traffic is dence on the road then count down timer change the time. At the same time if  ambulance or any vip  vehicle is coming then  infra red signal from the  vehicle change the path from red to green. When traffic is stop then there is a permission of the road side people to cross the road. Using 89s51 controller.

1. 9. ALCOHOL SENSOR WITH AUTO SUPPLY CUT OF AND ALARM INDICATION.

1. This is the concept of security system in house, we use this concept  in our home with   LPG  GAS SENSOR,  ALCOHOL SENSOR  for car. When sensor detect the gas then it display on the lcd and at the same time  alarm is on and cut off the supply chain. 89s51 microocntroller,  lcd dsisply, gas sensor.

1. SPEED CONTROL OF DC MOTOR THORUGH MANUAL AND INFRA RED REMOTE USING DAC TECHNOLOGY.

In this project we show the unique concept of speed control of dc motor. With the help of this project we control the speed of dc motor through  manual and via transmitter remote. Using seven segment display. 89s51 controller , using serial communication based remote.

1. 11. AUTO DISTRIBUTION CONTROL WITH  TIME BASED CUT OFF LOGIC. .

Just wonderful project to demonstrate the automatic distribution control   with lcd display and display the zone control with time option. With the help of Menu driven based program we  control the timing of the  4 different channel  for on  and  off time control.

1. AUTO DISTRIBUTION CONTROL WITH  CURRENT FEEDBACK CONTROL.

In this project we  set the current limit of the output load , if the acquired load is to be increased then current transformer provide a feedback and  load is cut off automatically. Using 89s51 controller + lcd display + current transformer.

1. SMS ON LANDLINE.

    Auto  hook up circuit, when any body call the number then phone is automatic on after some time. Then  with the help of keyboard we  enter a written message  on the receiver  phone, using 89s51 controller, lcd display.

1. VOTING ON TELEPHONE LINE.

In this project we show that how we enter a vote through a  landline or mobile phone from any part of the  world, data is to be record  in the external memory 24c02. One peon enter a one vote at a time , using 89s51 controller, lcd display.

1. ENERGY THROUGH BUSY ROAD + AUTOMATIC STREET LIGHT+ AUTO LIGHTS ON RAD ENTRY  AND AUTO OFF ON EXIT.

In this project we show that how we convert the mechanical energy into electrical energy with the help of dynamo and save this energy in the small chargeable battery, with the help of light sensor control the working  of street light and at the same time  when any vehicle on the road then all the lights are on if there is no vehicle on the area then half lights are on

1.  GSM ROBOT WITH AUTO PATH FINDER + ANTI FALLING CONVEPT.

By using gsm mobile phone we can control the movement of any robot  for forward, revee, left and right . We change the robot from gsm to auto path finder with left and right sensor , at this time robot sense the  depth also by anti falling sensor .

1. SMART PARKING CONTROL .

In this logic we  control the parking system  with 8 sensor , auto door open, car detection on entry . display the  available space on lcd, if no space then  display no space, 89s51 controller,

1. SMART PARKING WITH MULTILEVEL LIFT

  In this project we ass the  two floor lift with above project.+ lcd display and show the empty space on lcd and control the movement of the lift  on  empty floor automatically.

1. SMART CARD CONTROL +LCD+ 89S51 CONTROLLER+ ATTENDENCE RECORDER+ ROOM LIGHT CONTROL.
2. ERP SYSTEM.

 In this project we use the smart card system with the vehicle, when car move on the road then money is automatic detected by the sensor, if the money is not in the card then car is shoot with automatic camera

1. ELECTRONICS ROAD PRICING AND RED LIGHT JUMP LOGIC.

6000 .In this project we show that how we control the movement of the  traffic on the road , if we insert a barrier in the road and this barrier is to be control by the  coin inserted logic. As we insert the coin in the coin box then barrier is open automatically.

1. Next circuit is red light jump circuit , when red light is on then infra red sensor on the road is activate and if any vehicle is crossed through the road then one alarm is on for a time , Alarm  circuit is off in during the   green light and yellow light.

.

1. Ultrasonic Radar- In this projects we will use 89s51 and 16*2 LCD for display angle and distance. We will use 40 khz ultrasonic sensor
2.  Ultrasonic auto stop train- in tis project when two trains coming in front of each other then it will stop each other. Range 5 – 10 mete.
3. RF controlled ROBOT – range from 40-120 yards.
4. wireless Road accident security sustem
5. Security system from terrorist
6. Wireless runway security  system- for four Aero planes- on LCD, RF technology. Buzzer , LED indication.
7. Peltier based temperature control
8. RF LOCK system
9. Ultrasonic LOCK
10. Biofeedback system for data logging
11. GSM and DTMF based tele medication for different alignment
12. Green bee based environment control
13. Machine control using DTMF
14. Wireless walking robot
15. Punch card based enter access control
16. static and dynamic password based solutions
17. Proximity and wireless card based attendance system
18. Library book issue security
19. RF prepaid meter
20. prepaid meter with wireless alert
21. Automatic Car utility system- in this project we will sense different inputs   from different senso like rain senso for car wipe movement, LDR for dipper   control, IR for car security
22. IR moving platform
23. RF based toll tax plaza
24. GPS monitoring system- in this system there will be system in which will show current location of vehicle according to nearest satellite. -project is costly because of GPS –

Total cost of project( +(GPS)= ) .  will given back if student will bring back gps mean cost will reduce to half)- student have to register for this project in fit two month of semester.otherwise in last of semester no booking.

• Accident security system using GPS- in this system there will be system in which when there will be any accident then our system will detect fault any will automatically send location (using GPS)  via GSM modem. It will send sms from  GSM modem- project is costly because of GPS  and GSM modem-

Total cost of project( +(GPS)+(GSM)=1) .  will given back if student will bring back gps and gsm modem- mean cost will reduce to half)- student have to register for this project in fit two month of semester.otherwise in last of semester no booking.

• SMS based Feedback system for security- in this project we
• Finger print Attendance system – in this system it works like realtime system. There will be LCD to show data. 12 microswitches to mark attendance and to check attendance. There will be provision to  add finger print.
• VHDL based ROBOT
• VHDL based Robotic arm-
• Sound operated robot- . if sound module will returned back then
•  

Voice recognition based Robotic ARM/device control/security system-in this project our system will listen to our voice commands. And will take action like arm movement according to it.arm will move up down right left around axis.

• GSM modem based security system- in this system we will use IR sensor for any thief detection then will send sms from our system.cost of project .+modem cost
• Prepaid energy meter with sound feedback- In this system we will recharge our meter with gsm mobile. After recharde meter will start working. If amount will less in our meter then our  speech processing system will speak voice tag recorded in it.
• Automatic garage system- In this project we will use IR sensor for any person entering in the garge. There will be one password access system . if the person enetered password is ok then our control system disable the IR sensor. If person does not eneterd password then shutter will shut down and thief will locked in garage. We can open garage will remote system
• Automatic weighing scale system- In this project we will make automatic weighing scale system. There will be one conveyor. Material will auomatically load and will automatically leave . material will  move from conveyoyir to weighing scale. If material equal to required then our control panel will stop conveyor.