Multi operation machine

Project Synopsis

on

“Multi function machine”

Submitted in partial fulfillment of required for b-tech in “Electronics & communication” under Punjab state board of technical education and industrial training Chandigarh

Submitted by:-

RIMT

(Mandi Gobindgarh)

Submitted To:-

DEPARTMENT OF “ Mechanical”

RIMT- Near floating side, Mandi Gobindgarh. Punjab (147301)

PROJECT SYNOPSIS

ON

Multi function machine

INDEX

ACKNOWLEDGEMENT

Many individual have proudly influenced us during our Studies (B.E) at RIMT ENGINEERING College,Mandi Gobindgarh and it is pleasure to acknowledge their guidance and support. At RIMT Polytechnic, We learned many things like the project training is mainly aimed at enabling the student to apply their theoretical knowledge to practical as “The theory is to know how and practical is to do how” and to appreciate the limitation of knowledge gained in the class room to practical situation and to appreciate the importance of discipline, punctuality, team work, sense of responsibility, money, value of time, dignity of labour.

I will like to express my gratitude towards Mrs. Talwar  who took keen interest in our project, who helped me in every possible way and is source of inspiration for all the group members.

I would also like to thank Mr. Talwar (HOD), Electronics & Communication who motivated us to complete our project with enthusiasm and hard work.

Components:-

6mm Iron strip 12*12 Inch         2

6mm Iron strip 6*30”       1

Ply Board 12mm

Sweeing machine 220 V               1

Crown pinion                      1

Center bearing                    1

1’’ L-shap iron strip           16 fit

Pully 2”                     1

Pully 7”                     1

Hex-saw Blade        1

Drilling Bit Holder   1

Bush                           2

5 fit, 1” pipe             1

INTRODUCTION
           

 The aim of our project is to design and fabricate a Motor operated multipurpose device. With this device a number of operations can be performed. They are as follows:
1. Drilling
2. Reaming
3. Boring
4. Grinding
5. Screw driving

6. Cutting
This device is operated by Motor. We are controlling this machine with ac  motor . we know in these days time & Money is very important. In production centers there are are more need of above works. So if we take all machine for all work then a large investment is required to purchased them and obviously space also required. So to keep this in mind we made this project. We can do all works in one machine. Hence we can save space and money as well as time also.

We rotate a motor with 220 Volt. This rotation is transmitted to the machining head by a shaft and the required operation is carried out. Further if a hole is to be drilled., the particular part is to be placed in this machine. At end of shaft we can connect hex saw, shaper and more tools.

So multi purpose device is used for various operations with a less amount of investment.


The project work subject is one, in which actually we are leaning the theoretical concepts in practical way. Also the practical experience is one of the aims of this subject. For a developing industry these operating performed and the parts or components produced should have its minimum possible production cost, then only the industry runs profitably. There are a number of units having used in industries for various purposes.
For our thought the various project name are given below.
1. Pedaling sheet meal cutter.
2. Pneumatic multi purpose device.
3. Versa mill.
4. Paint mixer
5. Mechanical Jack.
In small scale Industries and automobile maintenance shops, there are frequent needs of tightening and loosening of screws, Drilling, Boring, Grinding, etc. Huge and complicate designed parts can not be machined in ordinary machines. Further for every operation separate machine is required. This increases the initial cost required, large area requirements and a large number of machines are required.


BLOCK DIAGRAM:-

ADVANTAGES

  1. Money saving
  2. Time Saving
  3. Efficiency increasing
  4. More output in less time
  5.  
    CHAPTER – 11

DISADVANTAGES

CHAPTER – 12

application

Base on the application of the device, I would say that it is very useful for small industrials, Carpenters,

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top
Open chat